Template:InstallMono481

From Array Suite Wiki

(Difference between revisions)
Jump to: navigation, search
(Created page with "=====Install Mono 4.8.1===== * Download Mono 4.8.1 wget -c http://download.mono-project.com/sources/mono/mono-4.8.1.0.tar.bz2 The bz2 file can be saved to a temporary l...")
 
 
Line 1: Line 1:
 
=====Install Mono 4.8.1=====
 
=====Install Mono 4.8.1=====
 +
* If not done already, install cmake
 +
 +
    sudo apt-get install cmake
 +
 
* Download Mono 4.8.1
 
* Download Mono 4.8.1
  

Latest revision as of 21:44, 27 August 2019

Install Mono 4.8.1
  • If not done already, install cmake
    sudo apt-get install cmake
  • Download Mono 4.8.1
    wget -c http://download.mono-project.com/sources/mono/mono-4.8.1.0.tar.bz2

The bz2 file can be saved to a temporary location, e.g. ~/temp/

  • Compile and install. On the command line, type
    tar jxvf mono-4.8.1.0.tar.bz2
    cd  mono-4.8.1
    ./configure  --prefix=/opt/mono-4.8.1 --with-large-heap=yes
    make
    make  install

Note:

  • The location of mono installed is set by the option "--prefix" in the configure step, which can be changed to another location.
  • The option --with-large-heap=yes is to enable support for GC heaps larger than 3gb, which is required for NGS alignment, as well as some Array Server functions)

Double check mono installation and version

ls /opt/mono-4.8.1/bin/mono* -all
/opt/mono-4.8.1/bin/mono --version
/opt/mono-4.8.1/bin/mono-sgen --version